VTSS220
V. 03
–
29/01/2021
4
©Velleman nv
blows cooling air through the heater pipe for a
short period. This protects the heater from damage
and extends its lifetime. Do not disconnect the
mains plug during this cooling process.
Do not crimp the power cord and protect it against
damage.
Warning!
If the power cord is damaged, it must
be replaced by the manufacturer, its service agent,
or similarly qualified persons in order to avoid any
hazard.
Make sure that the available voltage does not
exceed the voltage stated in the specifications of
this manual.
Plug the power cord into a suitable,
earthed
mains
outlet.
Risk of electroshock
when opening the cover.
Touching live wires can cause life-threatening
electroshocks. Do not disassemble or open the
housing yourself. Have the device repaired by
qualified personnel.
Do not operate the device with wet hands.
Never use the device on live electronic circuits.
Make sure power to the work piece is cut and
capacitors are discharged.
Do not use near inflammable products or in
explosive atmospheres. Heat can cause fire to
inflammable products even when they are not in
sight. Only use in properly ventilated rooms.
Incorrect use may cause fire.
Do not touch the shafts, tips, or hot air gun as this
can cause serious burns. Keep the tips and hot air
