P a g e
|
20
FAQ
Can I use the VM130V2SET with a previous version?
No, the VM130V2SET is not compatible with previous versions (VM130N, VM130) as the wireless
modules use the 433 MHz band.
The TUYA function does not work when I move the receiver.
Check if the receiver has good Wi-Fi reception on its location. If you changed the name of your Wi-Fi
network or your password, you will have to re-pair the receiver to the TUYA IoT cloud.
I can hear a click every time the channel switches.
This is perfectly normal. When switching, the channel activates a relay with a mechanical
component. The click you hear is the switching of that mechanical part of the relay.
When I switch on the receiver, the relay switch without having used the transmitter.
This is normal. The relays will shortly be activated when switching on the receiver. After a short
period, these will be deactivated. That is why we ask you to make sure no devices are connected to
the relays at the first set-up and when pairing the transmitter and to TUYA IoT cloud (where you
switch the device on and off a couple of times). The VM130V2SET is designed to stay switched on
permanently. This situation only happens at start-up.
Does the VM130V2SET work at the 5 GHz Wi-Fi frequency?
No, the VM130V2 only works at the 2.4 GHz Wi-Fi frequency.
Can I modify the RF frequency (433 MHz)?
No, you cannot modify the 433 MHz RF frequency.
Can I buy a transmitter separately to pair to an existing VM130V2SET?
Of course! You can buy the VM130V2-T separately, which is only the transmitter.
RED Declaration of Conformity
Hereby, Velleman Group nv declares that the radio equipment type VM130V2SET is in compliance
with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
www.velleman.eu. www.velleman.eu.
