Using the VM130V2set with the TUYA app
This requires an internet connection on your smartphone & good Wi-Fi connection to the receiver.
1.
Open the TUYA app or SmartLife
app on your smartphone & select the “Power Strip” device.
2.
You will see the state of both channels. Press a channel to change its state (ON/OFF
–
OFF/ON).
3.
Use the
‘
CountDown function
’
to use a countdown timer for a specific channel (you can select a
time that you want the channel to turn off or on).
4.
Use the
‘
Schedule function
’
to add multiple times during the day or week when you want each
individual channel to turn on or off.
5.
By using the “Smart” tab in the app, you can specify several actions that will co
ntrol the
channels.
a.
Example 1: By creating a new smart action, you can turn on a channel based on
sunset/sunrise information available in the app.
b.
Example 2: If you want the channels to act like a “pulse”, you can use an action to create
this functionali
ty. Create a new action that will trigger from “When device status
changes”. Choose CH1 “ON”. Next, specify the delay (1 sec –
5 hours). Add a final task to
turn the channel off (
“
Run the device
”
/ CH1 / OFF). Now every time you activate
channel 1 (via the app or via the transmitter), the channel will automatically turn of
after the set delay.
The full manual of the VM130V2SET can be found online at
RED Declaration of conformity
Hereby, Velleman Group nv declares that the radio equipment type VM130V2SET is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
www.velleman.eu.
Symbols
CE marking.
When the end-user wishes to discard this product, it must be sent to separate
collection facilities for recovery and recycling.
For indoor use only.
Summary of Contents for VM130V2SET
Page 1: ...VM130V2SET...
