12
CHECK THE WHOLE MOUNTING ONCE
MORE THOROUGHLY AND DON'T FOR-
GET THE CODE, BECAUSE AFTER THE
FOLLOWING ASSEMBLY IT WON'T BE
ACCESSIBLE ANY MORE.
Pass two 2mm bolts through the front panel and fix them
using a nut. Then pass a lock washer over the bolts fol-
lowed by the keyboard module. Take care that the LED is
in the front panel. Normally, neither the LED nor the push
buttons may pass through the front panel. The push but-
tons must be flush with the front side.
Pass a 10mm distance tube over the two bolts, followed
by the master module. Also take care that the through
connections pass through the master module.
Now fix both modules using two nuts, where after you can
solder the through connections (pay attention to short-
circuits).
Assembly (fig 3.0)
Assembly
!
