VMB4PD
16
Modifying the Labels
It is possible to label all commands so as to explain their function.
1.
Hold the configuration button pressed for 4 seconds to display the configuration menu.
2.
Press the configuration button again to display the configuration menu.
3.
Press the lower right button to display the label editor.
4.
Move the cursor to the left or to the right using the two upper push buttons.
Select the character using the two lower push buttons.
Press the configuration button to display the second set of commands (commands 5 to 8).
Configuration button
Next configuration menu
Label editor
Quit configuration menu
Cursor to the left
Cursor to the right
Select character
Select character
Display second set of commands
Summary of Contents for Velbus VMB4PD
Page 1: ...VMB4PD 1 VMB4PD Push Button and Timer Module for Velbus System...
Page 34: ...VMB4PD 34...
Page 35: ...VMB4PD 35...
