VMB4PD
13
6.
Confirm by pressing the upper left button.
Remarks:
The seconds counter starts from 0 when setting the time. Wait for the beginning of a minute
•
Hold the configuration button pressed for 8 seconds to display the contrast mode.
•
The display contrast may be set too low if experiencing a blank display. Hold the configuration button
pressed for 8 seconds to switch the module to the configuration menu which allows modifying contrast.
Hold the upper right push button pressed for 3 seconds. The contrast will be set at its maximum.
•
The module will automatically quit the configuration mode after 30 seconds of inactivity.
Confirm time
Next clock menu
Setting the minutes
Summary of Contents for Velbus VMB4PD
Page 1: ...VMB4PD 1 VMB4PD Push Button and Timer Module for Velbus System...
Page 34: ...VMB4PD 34...
Page 35: ...VMB4PD 35...
