![background image](http://html1.mh-extra.com/html/velleman/pmr3/pmr3_manual_4107725002.webp)
PMR3
VELLEMAN
- 2 -
4. Operation
a. Turn the Unit On/Off / Volume Control
When the unit is off, turn the volume knob (fig.1 #1) clockwise. A click indicates the unit is switched on. Turn the knob further clockwise to
increase the sound level. Turn it counterclockwise to decrease the sound level.
Turn the knob fully counterclockwise until it clicks. Now the unit is switched off. Note that the unit may also be turned off when it is set to a very
low sound level very near to the on/off click point.
b. Selecting the Channel
- Press the up (
fig.1 #4) or down (
fig.1 #11) key to select the channel.
- Set both units to the same channel for communication.
c. Call Function
- Press the Call key (fig.1 #5) to let the other unit ring its call tone.
- There are short calling melodies indicating the start and finish of the call tone transmission.
d. Transmitting a Message
- Press and hold the PTT key (fig.1 #2). Speak into the microphone from a distance of 2,5 to 5cm.
- When you have finished speaking, release the PTT button to be able to receive signal from the other device.
- To talk over the earphone, simply plug the earphone into its jack (fig.1 #8) and hold the PTT button while speaking.
e. Monitoring Function (MON)
The monitoring function can be used when there is weak transmission.
- Press and hold the MON key (fig.1 #3) to hear all signals on the selected channel.
- Release the MON key to return to the normal status.
- Do not use the MON function when the transmission is OK: it will only result in more background noise.
f. Key Lock
- Press the Call key (fig.1 #5) and the up (
fig.1 #4) or down (
fig.1 #11) key simultaneously for 3 seconds until a double bleep indicates
the keys are locked. The key lock icon (fig.2 #1) appears on the screen.
- When the keypad is locked, the
and
keys do not function while the CALL, PTT and MON keys do.
- Perform the same operation to unlock the keypad as to lock it.
5. Points of Interest
- Do not hold the antenna while the
PMR3
is being used: this may affect transmission quality.
- Do not attempt to charge non-rechargeable batteries as this may damage both the device and the batteries.
- Your
PMR3
has been fully tuned prior to shipment. Do not open the housing or alter the settings.
- The only user-serviceable parts are the batteries.
- Avoid using the device in a dusty, humid or extremely hot or cold environment.
- Turn off your PMR in any place where posted notices instruct you to do so, such as on board an aircraft or in a hospital. Most health care
facilities use equipment that is sensitive to external RF energy, therefore it is recommended not to use your PMR there in order to avoid
electromagnetic interference.
- Use a soft moist cloth to clean your
PMR3
. Do not use chemical agents as they may harm the housing of the unit and leak inside, causing
permanent damage.
6. Technical Specifications
Channels
8
Operation Frequency
UHF – from 446.00625 to 446.09375MHz
Talk Range
up to approx. 2 miles or 3km
Power Output
≤
500mW
Power Source
3 AAA batteries