PIR500 VELLEMAN
1
PIR500 - PIR Motion Detector
1. Introduction
The
PIR500
is an infrared sensor that uses SMT technology. Installation of the device is very easy and it is suited for
a wide range of applications.
2. Specifications
Power Source
220-240Vac
Power Frequency
50-60Hz
Detection Distance
12m max. (< 22°C) (adjustable)
Detection Range
>140°
Ambient Light
3lux ~ 1000lux (adjustable)
Time Delay
5s ~ 420s (adjustable)
Working Temperature
-20°C to +40°C
Working Humidity
< 93% RH
Installation Height
0.4m to 1.8m
Power Consumption
0.45W (standby 0.1W)
Motion Speed Detection Range
0.6 ~ 1.5m/s
Rated Load
500W (220-240Vac)
3. Operation
Parts:
1. Detector window
2. Microphone
3. PIR sensitivity adjustment
4. LED detection indicator
5. Function switch
6. Timer adjustment
7. Light sensitivity adjustment
•
The
PIR500
has 3 operation modes: on / off / movement detection (PIR).
•
The detector is much more sensitive to objects moving across the detection area (fig. 2 below) than it is to objects
coming straight at it (fig. 3 below). This is a very important consideration when selecting the mounting location.
•
The device can operate in both day and night situations, thanks to the adjustability of the PIR sensitivity and the
light sensitivity. The duration of the output signal can also be adjusted.
•
The device can be installed in round as well as square pattresses.
•
The detection indicator flashes once every time the device detects movement.
•
Do not use this device to control a fluorescent lamp.
•
Do not install the device where it can detect constantly moving objects, or near temperature regulating devices
such as air-conditioning and heating devices.
•
This device should be installed, maintained and repaired by a qualified person.
Fig. 2
Fig. 3
Fig. 1
Referencia Electrónica Embajadores: SG51500
