PI600M & PI60024 v2 GB
5
11. CHASSIS EARTHING
The chassis earthing lug should be connected to an earthing point, which will vary
depending on where the power inverter is installed. In a vehicle, connect the
chassis ground lug to the chassis of the vehicle. In a boat, connect to the boat's
grounding systems. In a fixed location, connect to earth.
12. CAUTION
In case of trouble with the AC output, e.g. short-circuit, overload, etc… the
protection circuit will automatically cut off the output.
In such cases :
(A) switch off the power at once
(B) disconnect all units
(C) check the connected devices
(D) use the units again as soon as any problems
concerning the connected devices have been solved
When in use for a prolonged period of time, the AC output may suddenly be cut
off although the battery voltage is still very strong. This may be caused by
excessive temperatures. If this happens, please proceed as follows :
(A) Switch off the inverter at once
(B) Disconnect some of the appliances or wait until the inverter cools off
(C) Switch the inverter back on
Always keep the inverter in an environment which is :
(A) Well-ventilated
(B) Not exposed to direct sunlight or any other heat source
(C) Inaccessible to children
(D) Safe from water/moisture, oil or grease
(E) Safe from any flammable substance
If the inverter is connected in the wrong way, this will void the warranty.
