PCUSBVC3
V. 01 – 07/05/2013
6
©Velleman nv
Make sure the
PCUSBVC3
device is properly connected and select
[Capture, create, or edit videos]
.
Set
[Source]
to SMI Grabber Device.
Set
[Audio device]
to USB Pin Source.
Set
[Video input]
to Composite or S-Video depending on the used connection.
Click on
[Device setting]
to set the applicable video standard (NTSC_M, PAL-B).
Explanation on how to use your software can be found on the included CD-ROM (under directory
\Document\Manual
).
8.
Troubleshooting
Hardware connection issues.
The
PCUSBVC3
comes with and female S-video and 3 female RCA connectors. Most video sources will also
have female connectors. Male-male RCA cables or a male-male S-Video cable is not included and must be
purchased separately. Note however that these cables often are included when buying a new video source
(e.g. TV, Video...).
In case your video source only comes with a SCART output, you must purchase an adaptor with a SCART
connector on one end and three RCA connectors on the other.
