NVR4
V. 01 – 14/04/2014
6
©Velleman nv
Notes
The recorder will automatically configure the IP address of a camera connected by LAN if:
•
The connected IP camera is our brand’s IP camera.
•
The default IP configuration method of the camera is set to DHCP (default setting).
•
The camera is powered on before the recorder is powered on.
8.
Information and Menus on the Screen
Key lock / unlock
To lock or unlock NVR local operation, click
(lock) or
(unlock) on the NVR status panel. When you
unlock NVR local operation, the system asks you to enter a user name and password.
Note: The default user name and password are "admin". Different user types have different access rights to
NVR functions. For details, refer to the full manual on the CD-ROM.
8.2
NVR and Network Status Icons
The status icons for NVR and network are displayed on the upper right corner of the screen (next to the
available hard disk space).
The icons displayed may vary depending on your situation or configuration.
The possible icons are:
NVR status Icons
key lock
key unlock
channel lock
channel unlock
USB flash drive / device connected
no USB device connected
timer recording on
timer recording off
overwrite on
overwrite off
sequence mode on
sequence mode off
PTZ mode on
PTZ mode off
CPU load
Network Status Icons
(WAN) internet connected
(WAN) internet disconnected
(WAN) local connection
(LAN) auto mode – Mbit/s
(LAN) auto mode – Gbit/s
(LAN) DHCP / static IP mode
(LAN) camera disconnected
Channel Status
The Channel Status icons are displayed on each channel on the screen. The possible icons are:
auto search on
auto search off
live audio on
audio off
audio playback on
audio playback off
original size
fit to screen
