NVR4
V. 01 – 14/04/2014
4
©Velleman nv
•
local and remote control completely independent
•
HDMI video output resolution up to 1080p
•
automatic integrated Dynamic Domain Name Service (DDNS): free service
•
USB mouse: incl.
•
IR remote control: incl.
Optional hardware
•
hard disk: HD500GB/S, HD1TB/S, HD2TB/S
•
monitor: MONSCA9
•
HDMI cable: PAC400Tx series and PAC400Gx series
•
compatible IP cameras: CAMIP16, CAMIP17, CAMIP18, CAMIP19
•
router: EM4544, EM4543, EM4571, PCRT1
5.
Overview
Front panel
alarm
LED indicator: an alarm event occurs
wan
LED indicator: the NVR is connected to internet
lan
LED indicator: the NVR is connected to the LAN
SATA
LED indicator: SATA hard disk is active
HDD1 to HDD5
LED indicator: up to 5 hard disks are installed in the NVR and connected well
(3 HDD with quick-lock installation)
USB port
Insert a compatible USB flash drive for video backup.
Note: For the list of compatible USB flash drives, refer to the full manual on the
CD-ROM.
mouse port
Insert a mouse (included).
Back panel
1
AUDIO OUT
Connect to an amplifier audio line-in.
2
HDMI video output
port
Connect to a monitor that supports high-definition video output (HDMI port).
Note: Use an appropriate adapter (not incl.) to connect a monitor with VGA or
composite connectors.
3
External I/O
RS 485 port
4
eSATA
This port is used to connect a storage device supporting eSATA interface; for
instance, an external disk array.
5
WAN
Connect to internet via an 8P8C (RJ45) network cable
6
LAN
Connect to local IP cameras via an 8P8C (RJ45) network cable.
7
DC 19V IN
Connect to the power supply adapter (incl.).
1
2
3
4
5
6
7