![background image](http://html1.mh-extra.com/html/velleman/microbit/microbit_user-manual_4081207015.webp)
VMM502
V. 01 – 17/01/2019
15
©Velleman nv
Let’s get started!
Step 1
Insert the micro:bit into the BoB.
Connect the crash sensor to pin 0 (P0), the green LED to pin 4 (P4) and the red LED to pin 1 (P1) using
the jumper wires Make sure for all components that the colour of the wires matches the colour of the
pins on the breakout board.
Plug the OLED into the I²C row at the bottom of the BoB as shown in the image.
Step 2 – Pre-Coding
Refer to
Project 1
,
Step 3 – Pre-Coding
.