Velleman KSR6, User Manual, Page: 3 / 34

KSR6
V. 02 – 09/02/2018 3 ©Velleman nv
4. Mechanical Parts List
1. 2x screw 3x6mm (P13)
2. 9x screw 3x6mm (P14)
3. 3x nut M3 (P15)
4. 4x hex post 10mm (P16)
5. 1x body (P17)
6. 2x antenna (P18)
5. Assembly
5.1 PCB Assembly
Start the assembly by mounting the resistors. The names of all components have been printed on the PCB:
Part ID Description Colour Code Quantity
R11 10Ω brown/black/black/gold 1
R12/17 15Ω brown/green/black/gold 2
R13/16 100Ω brown/black/brown/gold 2
R1 1K brown/black/red/gold 1
R4/9/10/15 4K7 yellow/purple/red/gold 4
R2/3/5 120K brown/red/yellow/gold 3
R6~8 10K brown/black/orange/gold 3
R14 1.8M brown/grey/green/gold 1
Mount the capacitors, the transistors and the diode next:
Part ID Description Quant.
C1 ceramic capacitor 331 1
C2/3 ceramic capacitor 104 2
EC3 electrolytic capacitor 0.47μf 1
EC1/2 electrolytic capacitor 100μf 2
Q1/2/7 transistor C945 3
Q8 transistor A733 1
Q4/5 transistor 8050 2
Q3/6 transistor 8550 2
D1 diode 1N4148 1
Mount the IC socket, the battery connector, the slide switch, the variable resistor, the pins, the IC and the pin
header.
Part ID Description Quant.
IC1 IC socket (fig.1 #13) 1
BAT. battery connector (fig.1 #14) 1
SW. slide switch (fig.1 #17) 1
VR1 variable resistor (fig.1 #16) 1
M1 (+/-)
pins (fig.1 #15) 4
M2 (+/-)
IC1 type LM324
1
To IR_PCB pin header (fig. 1 #8)
1
Fig. 2