Velleman K641LX, Assembly Manual

Page: 11 / 24

11
Solder at the through connection points A0,S3,A1,A2,etc... (fig 2.0); D,C,E,etc... (fig 3.0) of the display
module
(P6002D) , a wire jumper at the solder side, so that you can connect them to the processor module
(P6002UP) later on.
Cut the free ends of the wire jumpers on the bias (see fig. 4.0); this makes passing through the other pcb
easier.
Assembly
4.0 ASSEMBLY
SOLDERSIDE
A1 A2 S2 A3 S1 +V A0 S3 E D C L3 DP L4 G F A B
SOLDERSIDE
D
...
A0
...
+V
FIG. 2.0 FIG. 3.0
FIG. 4.0