__________________________________________________________________________________________________________________________________________________________
7
2. JUMPERS
q
J1 (mount 2 wires)
q
J2 (mount 2 wires)
q
J3 (mount 2 wires)
q
J4 (mount 2 wires)
q
J5 (mount 2 wires)
q
J6 (mount 2 wires)
q
J7
q
J8
q
J9
q
J10
q
J11
q
J12
q
J13
q
J14
q
J15
q
J16
q
J17
q
J18
q
J19
q
J20
q
J21
q
J22
q
J23
q
J24
q
J25
q
J26
3. JUMPERS FOR VOLTAGE
SELECTION
MAINS VOLTAGE SELECTION:
For
100V
mains input, mount:
A
A
For
120V
mains input, mount:
B
B
For
230V
mains input, mount:
C
C
For
240V
mains input, mount:
D
D
REMARK:
Strike out the NOT used mains voltage indica-
tion at the back of the housing !! e.g. cross out
with a permanent black marker
4. DIODES (Check the polarity!)
Note that from J1 to J6, two jumper leads have
to be mounted in the same hole.
TIP
In order to get nice straight wiring, without too
much folding and measuring, follow these
hints:
•
Mount the lead on the PCB as it is.
•
Solder 1 end of the lead.
•
Then carefully pull on the free end of the
lead until it is straight.
•
Now solder the other end.
