![background image](http://html1.mh-extra.com/html/velleman/ham263d/ham263d_user-manual_4106188014.webp)
HAM263D
00 (10/10/2008)
VELLEMAN
14
General status LEDs
EXIT/ARMED ON
System armed (whole system or one of the partitions)
OFF
System disarmed (the whole system)
Flash
System in exit delay period
AC POWER
ON
AC power normal
Flash
AC power failure
Flash Alternatively
with Battery LED
System in Standby mode
BATTERY ON
Battery low
OFF
Battery normal
Flash
Battery under testing
Flash Alternatively
with AC power
LED
System in Standby mode
PROGRAM ON
System in programming mode
OFF
System in normal operation mode
PART. 1
ON
Partition 1 armed
OFF
Partition 1 disarmed
Flash
During Exit Delay
PART. 2
ON
Partition 2 armed
OFF
Partition 2 disarmed
Flash
During Exit Delay
FORCED TO ARM ON
System will be forced to arm if the faulty zone is not
cleared
OFF
System armed normally
Flash
System forced to arm with the faulty zone(s) bypassed
by the system
Zone status LEDs
ON
Zone
abnormal
OFF
Zone
normal
Fast flashing
Zone was or still is in alarm mode
Fast flashing, 3x with
stopping interval
Zone was in alarm mode and is stored in alarm memory. System
is disarmed
Slow flashing
Zone is bypassed
Control key buttons description
There are 14 buttons for code entry and function confirmation
0 ~ 9
Numeric buttons for code entry
* #
For function confirmation
HOME
For home mode arming and programming
BYPASS
For (temporarily) bypassing zones while arming system