WT8097
00 (06/01/2009)
5
Velleman
®
•
The clock and date setup exits automatically after ±60 seconds.
Alarm 1
•
Press the mode button
[F]
2 times, the first alarm icon
[2]
starts
flashing.
•
Press the set button
[G]
repeatedly to select hour and minutes setting
and modify with the up
[H]
or down
[I]
button.
•
Press the mode button
[F]
2 times to return to time display. The display
indicates the time icon
[1]
and the first alarm icon
[2]
, indicating that the
alarm will be activated at set time.
Alarm 2
•
Press the mode button
[F]
3 times, the second alarm icon
[3]
starts
flashing.
•
Press the set button
[G]
repeatedly to select hour and minutes setting
and modify with the up
[H]
or down
[I]
button.
•
Press the mode button
[F]
once to return to time display. The display
indicates the time icon
[1]
and the second alarm icon
[3]
, indicating that
the alarm will be activated at set time.
Temperature mode
•
When in normal time display, press the set button
[G]
to select
between °Celsius or °Fahrenheit display.
7.
Operation
•
The clock has a noise/touch control function. When noise (e.g.
clapping hands, a knock on the table) or a touch anywhere on the
body of the clock is detected, the backlight will switch on and the
time will be projected on a wall or ceiling for ±5s.
•
To activate the noise/touch control, set the noise/touch control
switch
[K]
to the ON-position. When switched to the OFF-position,
only the snooze button
[E]
will activate the backlight and projection
system.
•
Alter the projection direction by turning the projection part
[C]
,
maximum angle ±60°.
•
Focus the projection lens by turning the lens focus knob
[D]
.
•
To activate/deactivate alarm 1 press the up button
[H]
; to
activate/deactivate alarm 2, press the down button
[I]
.
•
When an alarm sounds the corresponding icon will flash. Press the
snooze button
[E]
to enable snooze mode. The snooze icon
[4]
is
displayed and the alarm will sound again after 4 minutes. To exit
