DVM8681
V. 03 – 15/10/2018
45
©Velleman nv
5.
Desligue o medidor pressionando PWR. Cubra o eletrodo
com a tampa e guarde o medidor a uma temperatura
ambiente entre os 0°C e os 50°C (32°F a 122°F). Consulte
“
7.4. Calibrar o Medidor
” para proceder à calibragem em
3 passos.
7.2
Desativação automática
1.
O medidor desligar-se-á após
aproximadamente 20 minutos sem
atividade.
2.
Desative esta função pressionando HLD e PWR em
simultâneo antes de ligar. Aparece um “
n
” de modo breve
no visor. A função foi desativada.
A função será reativada
caso desligue o aparelho.
7.3
Compensação Automática da Temperatura (ATC)
1.
Uma vez que os valores do PH dependem da temperatura,
as aplicações de PH requerem alguma forma de compensar
a temperatura para garantir valores de PH standarizados.
Este medidor corrige automaticamente os valores de PH
baseados na temperatura da solução medida.
2.
Pressione CAL e PWR em simultâneo antes
de ligar. Aparece “
°C
” ou “
°F
” no visor.
Selecione a unidade de temperatura
pressionando HLD e pressione CAL para
salvar.
3.
aparecerá “
SA
” de forma breve no visor
para indicar que a sua opção foi
selecionada.
Esta opção permanecerá
guardada mesmo após desligar o
dispositivo.
7.4
Calibrar o Medidor
1.
A calibragem é necessária e deve ser feita regularmente,
mesmo diariamente, caso use o medidor com muita
frequência.
2.
Ligue o medidor de PH.