THE LED INDICATORS
MAINS (AMBER)
This is a status indicator. It flashes during standby and other indica�ons in synchroniza�on with
the pacifier tones. See the chart of LED indica�on signals below for the details.
DOOR (GREEN & RED)
This is a dual LED at the right side of the panel. It lights up in green while output 1 is ac�ve (The
door is open) and red while Output 1 is Inhibited; including manually inhibited with Super User
Code or due to False Code Lock-up se�ng in Loca�on 70.
Auxiliary (RED)
It lights up while output 2 is ac�ve.
BACK LIGHTING (BACK-LIT JUMPER SELECTION)
1. FULL BACKLIT
----
2. AUTO BACKLIT ----
3. BACKLIT OFF
-----
THE PACIFIER TONES & THE LED INDICATING SIGNALS
The built-in buzzer and the MAINS LED indicator give the following tones and signals for opera�on
status:
NOTE:
*
All Pacifier Tones can be enabled or disabled through programming op�ons at Loca�on 83.
**
The Output Ac�va�on Beep can be enabled or disabled through programming op�ons at Loca�on 81.
STATUS
TONES
*
LED SIGNALS
1. In programming mode
---
1 Beep
2 Beeps
5 Beeps
Continuous Beeps
---
1 second Long Beep **
ON
1 Flash
2 Flashes
5 Flashes
Continuous Flashes
1 Flash in 2 seconds interval
---
2. Successful key entry
3. Successful code entry
4. Unsuccessful code entry
5. DAP jumper not replaced
6. In standby mode
7. Output relay activated
●
●
●
The keypad gives dim backlit in standby. It turns to full backlit when a key
bu�on is pressed, then back to dim backlit 10 seconds a�er the last key
bu�on is pressed.
The keypad gives no backlit in standby. It turns to full backlit automa�cally
when a key bu�on is pressed, then back to OFF 10 seconds a�er the last key
bu�on is pressed.
The keypad gives no backlit at all.
7
