DCM267 GB
7
7.6. Temperature Range in °F
Range
Resolution
Testing Range
Accuracy
32°F to 752°F
±1.0% of rdg ± 3 digits
32°F to 1400°F
1°F
752°F to 1400°F
±2.0% of rdg ± 1 digit
7.7. Frequency
Range Resolution
Accuracy
2KHz
1Hz
±2.0% of rdg ± 5 digits
20KHz
10Hz
±1.5% of rdg ± 5 digits
Max. input tension : 250VAC
7.8. Diode & Continuity
Range Description
Display reads approx. forward voltage drop of diode
Built-in buzzer sounds if continuity exists (< 30
Ω
)
8. Replacing the Battery
WARNING
Disconnect all test leads from the circuits to be measured before opening the battery
compartment. Only use the device if the cover is in place and the screws are tightened in order
to avoid electroshocks.
The
-symbol is displayed if the battery needs to be replaced. Use the following procedure :
1. Disconnect the test leads from all live sources, switch off the device and remove the test
leads from the input terminals.
2. Use a screwdriver to remove the screw from the cover of the battery compartment and
remove the cover.
3. Remove the battery and replace it with a new 9V battery (NEDA1604 or IEC6F22).
4. Replace the cover and tighten the screw.
Remark : Respect all applicable laws when disposing of your old batteries.
9. Accessories
•
User manual
•
Set of test leads
•
“K”-type thermocouple
•
9V battery (NEDA1604 or IEC6F22)
•
Gift box
Summary of Contents for DCM267
Page 4: ...DCM267 GB 3...
