CAMZWEXT3N GB
5
c) Setting the output status
OFF
No triggering can occur with the switch in the OFF position
TV
With the switch in the TV position, the TV automatically switches to the AV channel when the
camera picture is received.
ALARM
With the switch in the ALARM position only the buzzer will be activated when a triggering signal is
received from the camera.
ALARM + TV
With the switch in this position, the buzzer will be activated and the VCR will tape the camera
picture.
d) Intercom
Provides two-way communication between the camera and the control unit. When the camera view is displayed on
the television screen, you will be able to hear the sound picked up by the camera's microphone. Hold the INTERCOM
button on the control unit in order to speak to the person you see on the camera picture. The INTERCOM LED lights
up, indicating that you can now speak into the control unit. Release the INTERCOM button if you want to listen to the
sounds again that are picked up by the camera's internal microphone. The TV remains activated for 10 seconds
when the intercom button is pressed.
e) "TV on time" & "trigger level"
Setting "TV on time"
: "TV on time" is the period during which the camera picture is displayed on your TV
screen. Set this period (5 to 30 seconds) with the TV ON TIME adjustment on the
side of the control unit.
Setting "TRIGGER LEVEL" : The "trigger level" is the sensitivity of the microphone input. Adjust the sensitivity
with the AUDIO SENSITIVITY adjustment on the side of the control unit.
f) LED Status Indicators
POWER
green
indicates the control unit is powered
TV
orange
indicates the TV has been triggered
INTERCOM/LEARN/VCR red
indicates the intercom button has been pressed
solid green
indicates the VCR recording mode is enabled
slowly flashing green indicates the camera has been triggered and the VCR is recording
fast flashing green
indicates that the LEARN mode has been activated.
g) VCR recording mode
Press the VCR button on the control unit. The VCR LED will illuminate, indicating that the CAMZWEXT3N is in VCR
mode.
Whenever the camera triggers the control unit, the latter automatically transmits the IR code sequence to the VCR,
which duly starts its recording. Make sure the VCR is recording on the AV channel.
When the control unit has been activated, the VCR's green LED starts to flash slowly and the VCR records the
camera picture. The VCR will ignore any other triggering signal that may come in during this time. After ± 5 to 30
seconds, the CAMZWEXT3N will automatically transmit an IR Stop/Standby command to the VCR in order to end the
recording. The CAMZWEXT3N is always ready for the next recording.
