![Velleman CAMSETW16 User Manual Download Page 6](http://html1.mh-extra.com/html/velleman/camsetw16/camsetw16_user-manual_4120457006.webp)
CAMSETW16
00 (12/08/2008)
6
Keys
Function
Select channel keys (
19
)
Press ‘+’ to show next channel, ‘-’ to show previous channel (
21
)
Initialize loop:
1. In normal mode, press and hold the loop key (
20
) for 3 seconds. ‘ ’ flashes
2. Press the channel selectors to indicate which channels need to be looped
3. Press the loop key (
20
) again to save the set-up. Scanning begins
Press the loop key (
20
) to start scanning all channels
Lock/Unlock the remote control to avoid accidental touches or interference from
other IR controllers. To lock, press the lock key (
18
) once (‘ ’ is displayed for
±1s), to unlock, press the lock key again (‘ ’ is displayed for ±1s).
When the remote control is locked, the cannel button (
17
) on the receiver still
works.
10.
Battery
•
The remote control is battery operated. Before first use, remove the battery protection
tape.
•
To replace the battery, face the back of the remote control, push the small tab (1) to the
right and pull down (2, see image below). The battery cover slides out of the remote
control.
•
Replace the old battery with a new lithium battery type CR2025. Make sure to use the
correct polarity.
•
Removing the battery when the device is not in use will extend the lifetime.
•
Do not attempt to recharge batteries and do not throw them in fire as they may explode.
WARNING: handle Lithium batteries with care, observe warnings on
battery casing. Dispose of batteries in accordance with local regulations.
Keep the battery away from children.
11.
Troubleshooting
Image Sound
Possible
reason/solution
No
No
Check power supply on camera and receiver.
Snow Noisy
Check whether camera and receiver are on the same channel.
Check whether the distance between camera and receiver is within
limits.
Ghost image Normal
Possible interference with other devices.
Check whether the distance between camera and receiver is within
limits.
No colour
Normal TV system mismatch (PAL/NTSC), or night vision enabled
Normal Noisy
Possible
interference with other devices.
Summary of Contents for CAMSETW16
Page 2: ......