VELLEMAN CAMSET5A -- VERSION II
6
CONNECTION TO MONITOR
IMPORTANT : Do not connect any camera to the monitor while monitor
is switched on.
1. Plug the camera into the camera input DIN sockets marked A and B at
the back of the monitor.
Ensure that the arrow on the camera plug is at the top before
inserting the plug into the input sockets.
2. Clipping the cables using the applied
cable clip and screw the cable clip into
the holes just beside the DIN sockets
on the back of the monitor.
3. Plug the power plug into into the
socked marked
DC 12-24V
at the back
of the monitor.
The connection of the power plug is
shown right.
Note that the Red wire with fuse holder
should be connected to car or truck
battery, and Blue wire to reverse gear
relay, Black wire to chassis ground.
To Reverse Gear
Relay or Switch
(Blue)
GND
(Black)
To DC 12-24V
Fuse & Fuse
Holder
(Red)
