VELLEMAN CAMSET5A -- VERSION II
4
CAMERA INSTALLATION
1. At camera mounting position, fit the camera mounting bracket
!
to this
position using the screws to the centre hole and slide hole.
2. Turn the bracket left and right to a correct direction and then tighten the
screws.
3. Fit the camera to the bracket using the supplied washers
"
, spring
washers
#
and screws
$
.
4. Rotate the camera up and down to a position that you can see the
picture you want clearly and then tighten the screws
$
.
5. Drill a cable entry hole through the wall or a door or a window frame just
below the mounting bracket.
6. Pull the cable fully through the hole. Inside the protected property, attach
the extension cable to the cable from the camera. Run the extension
cable to the monitor position.
CAMERA (CAM13)
WASHER
SPRING
WASHER
SCREW
BRACKET (CAMERA)
20m, 6 PIN CABLE
WITH MINI
DIN PLUG (MALE)
1.8m, 6 PIN CABLE
WITH MINI DIN PLUG (FEMALE)
