CAMSET13 VELLEMAN
3
e) Remote Controller
You can activate both the auto switch function and the single channel function (see above) with the remote control. This
is done in the same fashion as when the buttons on the A/V switcher are used.
For the auto switch function : press SCAN and the automatic sequence will start.
For the single channel function : press CH.
▲
or CH.
▼
to select a camera picture. Note that this function
automatically deactivates the auto switch function.
6. Specifications
a) Transmitters (four wired colour cameras)
Power Supply
DC 10V / 200mA
Current Consumption
0.22W
A/V Output
1Vpp / 75 ohm
Resolution 330
TV
lines
Image Sensor
1/3" CMOS
Pixels
628 (H) x 582 (V)
Scanning System
2:1 interlace
Min. Illumination
0.5Lux with F2.0 lens
S/N ratio
better than 46dB
Automatic Shutter
1/60 – 1/15000 sec.
Geometric Distortion
none
Gamma correction
0.45
AGC ON
Operating Temperature
-10°C to +50°C
Lens 6.0mm
/
F2.0
Dimensions
105 x 55 x 86mm (L x W x H)
b) Receiver (sequential A/V switcher with 4 inputs and remote control)
Power Supply
DC 10V / 600mA
Current Consumption
100mA
A/V Input
4 A/V inputs 1Vpp, 75 ohm
A/V Output
1 A/V output 1Vpp / 75 ohm
Dwell Time
1 ~30 seconds
Dimensions
195 x 125 x 30mm (L x W x H)
Adapter DC10V
/
600mA
(included)
CAMSET13 – A/V BEVEILIGINGSSYSTEEM MET 4 CAMERA'S & AFSTANDSBEDIENING
1. Inleiding
Dank u voor uw aankoop! Lees deze handleiding aandachtig voor u het toestel in gebruik neemt.
2. Inhoud
•
1 x A/V schakelsysteem met 4 ingangen
•
1 x afstandsbediening
(12V batterij type GP23A meegeleverd)
•
4 x kleurencamera met montagebeugel
•
4 x 10m coaxkabel
•
1 x A/V kabel
•
1 x AC/DC adapter 10V/600mA voor de centrale eenheid
