CAMIP7
13.01.2011
©
Velleman nv
5
•
Click
Next
again.
•
To finish software installation, the computer must be restarted. Select ‘Yes I want to restart my
computer now’ and click on
Close
.
•
After reboot, the
IP Camera Tool
icon appears on the desktop.
Mac
•
Locate and open the folder “For MAC”.
•
Open the folder “IP camera Tool” and copy the tool to your MAC to use it.
8.
Software set-up
•
Make sure all connections are properly made (see also §6) and double click on the
IP Camera
Tool
icon to start the software.
8.1
IP Camera Tool
•
The software starts searching for cameras over the LAN. 3 Situations can occur:
o
No cameras are found on the LAN. If after 1 minute the software does not detect any cameras,
check all cabling of the system and make sure the camera is powered.