CAMIP4N
Rev.
01
21/01/2010
©
Velleman nv
12
•
The firmware filename can be found by browsing to the ftp-site (
ftp:60.250.194.78
), username
upgrade
and password
upgrade
. Scroll through the available list and locate the correct version.
The name
must
start with
VS316-gen
.
•
To reboot the camera, go to the
reboot
page and click on
Reboot
.
7.4 Camera List
•
Once a camera has been set-up in the
Auto Search
directory, it must be added to the
Camera
List
. Right-click on
Camera List
and left-click on
New Camera
.
Note:
when the camera is not added to the Camera list, it will
not be available
worldwide.
•
Give the camera a name (e.g. its location), enter the camera ID and password and click
Add
. The
camera now appears under the Camera List directory.
Note:
the icon in front of the camera name indicates the status.
RED: the camera is offline, not connected to the Internet
YELLOW: camera is online, but not responding (e.g. due to router settings)
GREEN: camera is online and responding (but image might still be blocked by firewall settings)
•
The status refreshes automatically every 30s. Click on
Refresh status
to update the camera list
manually.
•
When right-clicking on a camera under the
Camera List
directory, following options are
available: