CAMCOLVC21
V. 02 – 05/05/2014
8
©Velleman nv
Light Frequency
When using the camera indoors, the
Light Freq.
setting can help
reduce flicker caused by artificial lighting. Select the frequency of
your local mains supply (50 or 60 Hz).
TV Out
Use the
TV Out
function to select the correct output format (PAL or
NTSC) for use with the TV-OUT connector
[4]
.
Formatting
Use the
Format
function to format the SD card. Choose
Yes
to
format the card; choose
No
to exit without formatting.
Caution:
formatting erases all the data on the card, including the
emergency videos. Create a back-up copy on your pc first.
System
Use the
System
function for resetting and for viewing system
information.
Factory Reset
: to reset the camera to the factory defaults.
Choose
Yes
to reset, choose
No
to exit without resetting.
System Info
: displays the version number of the camera
software.
Card Info
: displays SD card information; name, size in GB, and
free space in GB and %.
Delay Shutdown
If the camera is connected to the power adapter, it switches off when
the power supply on the adapter is switched off. However, if you
want the camera to keep recording after the power supply is off, set
Delay shutdown
to
On
.
7.
Video
7.1
Video Setup
To specify settings for video recording, proceed as follows:
1.
In video mode (not recording), press MENU.
2.
Make sure that video settings
are selected and press REC to
confirm.
All settings are described in detail below.
Movie Size
Use the
Movie Size
function to select the size of the video.
