7
VM206
USER MANUAL
Start
Output
Reset
4: Repeat cycle - after delay t1, relay turns on for t2; then repeats
Timing begins on the leading edge of the Start signal.
A cycle is initiated when the output will be OFF for the first set time (t1), then ON for the second set time (t2).
This cycle will continue until the Reset signal is applied or power is interrupted.
5: Repeat Cycle - relay turns on for time t1, off for t2; then repeats
Timing begins on the leading edge of the Start signal.
A cycle is initiated where the output will be ON for the first set time (t1), then OFF for the second set time (t2).
This cycle will continue until the Reset signal is applied or power is interrupted.
Start
Output
Reset
Start
Output
Reset
fig. 5
fig. 7
fig. 6
