7 |
Page
4.1 Exhaust Vent
Locate the exhaust vent location using the cutting template. Three configurations are
available to choose from:
One Rectangular hole
Exhaust and intake vents can be mounted together using the metal plate and six screws.
For this configuration, a rectangular hole needs to be cut. This approach is easier and faster
for installation.
Two square holes
The intake and exhaust vents are mounted separately. Two square holes need to be cut.
This configuration offers the most flexibility.
The vents can be mounted on the wall or on the floor. Follow the instruction below for
mounting in different locations.
Two round holes
Cut two 6-inch round holes at least 2 inches apart edge to edge. This works the best on flat
and even surfaces.