14 |
Page
4.4 Air Duct (Optional)
Air vents can be directly mounted on the unit or ducts can be attached to distribute the
cool air to different areas. If using the included ducts, drill 2.5-inch holes to install the vents
in the desired location.
4.5 External Control Panel (Optional)
The external control panel can be connected for easier access and better remote reception.
•
Pull out the extension connector out from the bottom of the unit (right underneath
the internal display panel).
•
Mount the control panel case to the wall with four screws.
•
Drill a hole in the center and pull the wiring through.
•
Clip the control panel to the case.
•
Connect the wiring to the unit.