- 4 -
2.
ASSEMBLY DIAGRAM “CAMELLIA” PRODUCT
Fig.1 Ends “A”, “B”
Fig.2 Intermediate arch “E”
Fig.3 Frame assembly (side view)
Fig.4 Doors “C”, “D”
3. ASSEMBLY OF ENDS “A” and “B” (identically the same).
Attention!
Places of fastening parts are indented and circled with a
marker. Polycarbonate mounting places are only indented.
To comply with the correct geometry, the assembly must be made on
a flat surface. Before assembly, sort and decompose the details of the
ends, doors and intermediate arches according to the scheme and the
list of components. For convenience and to accelerate assembly, the
fastening of parts by self-drawers can be made on one side of the
assembly element, then gently flip the design and secure the screws on
the other side.
