- 16 -
ATTENTION!
The greenhouse has a surface exposed to the wind. Do not leave the
greenhouse unfixed. When the greenhouse is installed in a windy area,
use any additional available materials (rods, bars, etc.) for attachment
to the ground.
Do not install the greenhouse in close proximity (less than 2 meters) to
any buildings, barriers, fences.
The site where the greenhouse is installed must be flat, free of
significant level differences.
To prevent from distortion of the greenhouse parts exposed to snow
load and wind load in winter, remove all cellular polycarbonate sheets
from the greenhouse arches (greenhouse roof) by removal of fixing
straps. The advantage of sheets removal for the winter is that snow
falls into the greenhouse so enriching the soil with useful minerals
when it melts, and protects it from desalination. The roof open in
winter prevents the situation when harmful insect crawl into the
greenhouse when it turns cold, and eat fresh sprouts in spring.
If removal of sheets is impossible, it is necessary to strengthen the
arches from inside using T-shaped wooden baulks (made of timber of at
least 50x50mm section) installed within the greenhouse – one baulk
per each arch. Wooden baulks are not included in a supply package and
are made by customers by themselves. The customer must
independently estimate probable snow load and install baulks or
remove snow from the frame when necessary, depending on climate
conditions or and/or location of the greenhouse.
Failure to comply with the above requirements is the basis for refusal
to provide warranty service for the product.
Install the greenhouse at least in 6.5’ (2 meters) from any buildings,
barriers, fences. When the greenhouse is installed in a windy area, use
any additional available materials (rods, bars, etc.) for attachment to
the ground. Do not expose the greenhouse frame to extreme
mechanical actions. Do not modify the greenhouse design by yourself.
