IG-305-EN version 01; 07/04/2020
10
Handling and transport
General Instructions
Outdoor cubicles:
cgmcosmos
,
cgm
.3 and
cgm
.800 systems
2.2. Transport
2.2.1. Road haulage
Transport is carried out on a standard truck or crane truck
platform.
Securing the unit to the truck's platform using slings is
recommended during transport, protecting the corners
with L-shaped profiles.
Local regulations must be followed for other road transport
aspects (gauge, maximum authorised weight, etc).
Packaging for road haulage
The outdoor units are supplied from the factory on a pallet
that is larger than the dimensions of the unit. All transport
protection elements must be removed once the unit is
installed, before it is commissioned.
2.2.2. Sea transport
Outdoor cubicles can be transported completely assembled
in an ISO container. The containers recommended for sea
transport are standard dry-van or high cube. In order to
prevent any defects or damage during transport, once the
unit is inside the container, we recommend securing it to
the base with slings tied firmly to the four lifting anchors on
the top part of the enclosure.
Packaging for sea freight
Ormazabal
recommends using Cortec VpCI-126 Blue film
(corrosion inhibitor in vapour phase) or similar to seal
the unit, thus preventing corrosion during sea transport.
Placing the enclosure in dehydrated salt is recommended.
The outdoor cubicles are transported from the factory on
a pallet, with polyurethane corner pieces on top of VpCI
film or similar. Once the equipment has been installed,
remove all the protection and transport elements before
commissioning.
Summary of Contents for Ormazabal cgm.3
Page 27: ......
