Vela Tango 100S, User Manual

Page: 4 / 12

4
1.1. SAFETY
This chair bears the CE mark and
conforms to all applicable EU rules.
The stool is manufactured by VELA,
Vermund Larsen A/S, Goeteborgvej
8-12, 9200 Aalborg SV, Denmark.
VELA Tango 100ES lives up to all
EMC-demands according to the IEC
60601-1-2.
1.1.1. USAGE
VELA Tango 100ES/S is an indoor
children’s chair designed for sitting
persons.
::
The chair is not build to stand on.
:: For safe transfer of a person to
and from the chair, the chair must
always have its brakes on.
VELA Tango 100 ES/S is tested
and approved for a maximum user
weight of 80 kg.
Important : People using a seatbelt
in a VELA Tango 100ES/S, should
always be supervised when the belt
is in use.
1.1.2. TRANSPORT
By transport in car, by plain or other
means of transport, always use
the chair’s brake. The chair is not
approved as a passenger seat in
means of transportation and should
not be used as such.
The chair withstands the following
transport specifikations:
Temperature: -40°C (-40°F) to
+70°C (+158°F)
Humidity: 15-95%
Air pressure: PPP up to 1000 meters
(3280 ft) above sea level
1.2. WARRANTY
VELA provides warranty by the laws
and regulations which are debt in the
country the chair is bought in. The
warranty only applies when using
original spare parts and accessories.
Modification may only be carried out
by authorised service technicians.
VELA does not accept responsibility
for damage or injury to the product
or user, which have arisen due to:
::
Transportation
:: Misuse
:: General wear and tear
::
Incorrect use
::
Use of non-original spare parts
and accessories
::
Adjustments carried out by
unauthorised service technicians
GENERAL