![background image](http://html1.mh-extra.com/html/vela/cineview-hd-pro/cineview-hd-pro_installation-and-user-manual_3884038026.webp)
20
CineView HD Pro Decoder Installation and User Guide
Software Installation
Software Installation
Be sure to review the “readme” files on the system software CD-ROM for the
very latest information on installation and performance issues.
Vela System Software Installation
The current version of software has been qualified to run under Windows 2000
(SP 4) or Windows XP. Windows NT, Windows 95 and Windows 98 are not
supported. Note that first-generation PCI decoders such as the CineView Pro,
the Pro XL and the Pro LE are not supported under this software release.
Note that Windows 2000 users should install Service Pack 4. See page 11 for SP 4
installation instructions.
If you are upgrading a previous version of software with this release, Version 2.3,
you must first uninstall the existing version of CineView HD Pro software if you
haven’t already done so. To do so, select the “Add or Remove Programs” option
on the Control Panel, select the item associated with “CineView HD Pro,” then
click “Change/Remove.”
After the previous version has been removed, you're ready to install this version
of CineView HD Pro software. All the software you need for the HD Pro decoder
is located on the installation CD. Just follow the steps that follow, noting that sev-
eral reboots may be required during the installation process.
Do not remove the
CD disc from the drive until you've completed the final step.
1. Insert the supplied CD into the CD-ROM drive. A Vela System Software Setup
screen should appear. If it doesn’t, run
setup.exe
from the CD. Select “Install
Vela System Software.”
2. Next, an Installation Wizard welcome screen (Figure 1-11) will appear. For the
most part, all the screens are self-explanatory and guide you from one install
point to the next. Click Next.
3. (Figure 1-12) Select the type of installation you prefer (Typical, Complete, or
Custom). At this point the required Microsoft.Net Framework v1.1 will automati-
cally be installed if it is not detected. Click Next.
4. The “Select Features” screen appears next (Figure 1-13). Choose the requested
features for installation, including the CineView HD Pro, by selecting the disk
drive icon displayed before each option. Select either the “will be installed on lo-
cal hard drive option” or “entire feature will be unavailable option.” You can also
select any desired licensed features at this time. Some options may not be current-
ly supported. Common files will be installed when needed. Click Next.