![background image](http://html1.mh-extra.com/html/vela/cineview-hd-pro/cineview-hd-pro_installation-and-user-manual_3884038021.webp)
Chapter 1 — Getting Started
15
Windows Hardware Driver Installation
Driver Installation on a Windows XP System
The drivers are located on the installation CD-ROM disc, in the following folder:
Drivers\Cineview HD
.
NOTE:
As noted in the steps below, you will need to perform parts of this procedure
three times to install the three separate drivers required for the HD Pro decoder.
1. Install the CineView HD Pro decoder board, as instructed above.
2. Power up the system. If the “Add New Hardware Wizard” screen appears when
you boot your system, click Cancel. (You may see this screen three times, once for
each of the three drivers you install.)
3. Insert the Vela System Software CD-ROM disc into the CD drive.
4. Exit the System Software Setup screen (Figure 1-11, page 21) if it appears.
5. On your desktop, right click on My Computer and a drop-down menu will
appear. Select Properties. (If the My Computer icon does not appear on your
desktop, click on Start > My Computer, then right-click on Properties.)
6. Click on the tab labeled Hardware.
7. Click on Device Manager. A screen will appear, similar to that in Figure 1-4.
8. Search for “PCI Device.” This can usually be found in one of the following
folders: Sound, Video and Game Controllers, or Other Devices. Note that three
PCI Devices will be shown. Right-click on the first “PCI Device” entry.
9. Select Properties from the drop-down menu.
10. Under the General tab, click on Reinstall Driver.
11. The Windows XP Hardware Update Wizard screen (Figure 1-5) will open.
Click the radio button: “Install from a list or specific location.” Click Next.
12. Another screen (Figure 1-6) will appear: “Please choose your search and in-
stallation options.” Click the radio button “Search for the best driver in these loca-
tions,” then check the “Search removable media (floppy, CD-ROM…” checkbox.
13. Check Browse to select the driver from the following path on the CD:
Drivers\Cineview HD
. The driver file is named “Cineviewhd.” (Same for all
three drivers.) Click Next.
14. (Figure 1-7) A screen may appear informing you that “The software you are
installing for this hardware… has not passed Windows Logo testing.”
Click Continue Anyway to proceed with the installation of the driver(s).