1.2.6. seat depth
The seat depth can be regulated by pushing the chair back forwards
or backwards on the two c-rails: Loosen the two screws on either
side from the back hinge and release the sliding bar for the back
tilt. The chair back can then be pushed forwards or backwards.
note!
Make sure to carefully tighten all bolts after adjustment.
1.2.7. poWer tilt/seat tilt
Depending on how the powerchair is equipped, it may have: fixed
seat tilt or electric seat tilt. The fixed seat tilt can be adjusted by
regulating the bar’s support plate. (Request technical assistance.)
The electric seat tilt is operated (standard) from the control box.
Choose the electric lift function by pressing on the function button
and pushing the joystick forwards to move the seat forwards or
backwards to move the seat backwards.
Depending on how the powerchair is equipped, the electric lift
function may be located in a tilt switch (optional).
2.0. safety points
For your safety, the following should always be observed:
•
The VELA Blues 200 is designed for limited outdoor use. It should only be operated on even
and firm surfaces in places where the user feels confident.
•
It must not be used outdoors at dusk or in the dark.
•
The VELA Blues 200 is as standard not approved as a passenger seat for use in cars, buses
or trains.
•
The chair is not designed to be lifted during transport.
•
Always make sure that the powerchair is secured using approved lashing equipment during
transport in cars, buses, trains etc.
•
Never stand on the footplates when entering or exiting the chair as this can cause the chair
to tip over.
•
Always lower the electric seat lift to the lowest position before negotiating obstacles and
before moving at high speeds.
•
Always lower the electric seat lift to the lowest position before negotiating sloping sur
faces.
•
Never drive sideways or diagonally on a sloping surface as this can cause the chair to tip
over.
•
The chair must never be exposed to rain or extreme moisture as it can damage the electron-
ics.
•
Never cover the battery charging unit during recharging as it produces heat. The battery
charging unit must be placed on a firm, well-ventilated surface.
•
When moving backwards and when operating the electric functions, make sure that other
people are well out of the way.
• The wheelchair can be configured for use as a passenger seat during transport, but only
as a specially configured version (see item 6 re. transport)
9
16
