background image

15

10

1.3. DriVing

1.3.1. Vr2 ControL Box

VELA Blues 1100 is as a standard, fitted with a control box type VR2. 

The power chair is switched on and off with the I/0 button.

To operate a tilt/seat height function, push the button 
on the joystick with a symbol of a chair. 
To operate a function the joystick is moved forwards (up) or 
backwards (down)

the speed up button increases driving speed: 

Push repeatedly 

on the button and you will see the light indicator move to the right.

the slow button reduces the speed: 

Push repeatedly on the but-

ton and you will see the light indicator move to the left. 
The control box has a hooter. 

It is not possible for the user to re-program the control box.

Force to mange the joystick:
Forward/backward: 1.3Nm
Sideways: 1.0 Nm

1.3.2. r-nEt ControL Box (optionAL)

As an optional feature, the powerchair can be equipped with a R-Net 
control box. The powerchair is turned on and off on the I/0 button. 

The mode button allows you to switch between the various functions: 
Press the mode button once and immediately move the joystick to the 
side. You will note that various indicator lights on the control box 
show which (of up to five possible) functions are activated: electric 
lift, seat tilt, chair back tilt, footrest right, footrest left. Every time the 
joystick is moved to the side, it changes to a new function. To operate 

a function, push the joystick forwards (UP) or backwards (DOWN).

Speed: The first option is to adjust speed. When the number in the 
display flashes, you can increase your speed by pushing the joystick 
forwards or decrease it by pushing the joystick backwards. (The speed 
will appear as a number from 1 to 5 on the display.)

When you want to move again, press the mode button and the 
powerchair will return to the drive position where the joystick is 
pushed forwards to move forwards.

Force to manage the joystick:
Forward/backward: 1.3Nm
Sideways: 1.0 Nm

 

Sitting height  

and back tilt 

 

1.5. pLACEMEnt oF thE ControL Box

1.5.1. pArALLEL Fittings

The control box is mounted on either the right or the left side 
according to customer specifications.

The VELA Blues 1100 is delivered with parallel fittings as standard, 
making it possible to slide the control box along the armrest so 
that the chair can come all the way up to a table.

Be careful with your fingers when sliding the control box back/for-
ward using the parallel fitting.

1.6. hip strAp

It is possible to equip the chair with a hip strap. This can be fitted to 

the chair as shown in the accompanying guide.

Summary of Contents for Blues 1100













Reviews: