ArgoNavis QA/QC Decoder
User Manual and Installation Guide
Page | 23
Use Alternate SD MPEG Decoder
When ‘checked’ this setting uses a different MPEG decoder design to perform decoding.
This setting is ‘Unchecked’ by default. This setting provides an alternate decode
platform which can be useful in certain troubleshooting or debugging scenarios.
Deinterlacing Mode HD
Selects which Deinterlacing filter to use. Options are:
1. Auto (Automatic deinterlace if picture type is field or MBAFF)
2. Weave (Do not deinterlace – output interleaved fields)
3. Vertical Filter Deinterlace (Vertical deinterlace)
4. Field Interpolation (Deinterlace by interpolation)
5. Rederer (No deinterlacing on the physical output)
Auto is the default setting.
Enforce Field Ordering for HD Source
This setting swaps the Field Ordering on the physical outputs and can be used to find
‘Field Ordering’ issues that result in a ‘jittery’ output. This setting should be used in
conjunction with:
1. Deinterlace Mode HD set to ‘Renderer’
2. Enable VANC Insertion ‘Checked’
Deinterlacing Mode SD
Selects which Deinterlacing filter to use. Options are:
1. Auto (Automatic deinterlace if picture type is field or MBAFF)
2. Weave (Do not deinterlace – output interleaved fields)
3. Vertical Filter Deinterlace (Vertical deinterlace)
4. Field Interpolation (Deinterlace by interpolation)
5. Renderer (No deinterlacing on the physical output)
Auto is the default setting.