veito CH2500 TW, User Manual

Page: 5 / 16

4
WARNING
!
*After reading this, be sure to keep it at a place where other users can refer to it at any time.
!
Use specific 230V 16A amp
socket.
(to prevent fire & electric shock)
230V
!
Ensure both plug and socket is
clean and free from dust when
using. Never use with a damaged
power lead, plug or loose wall
socket. (this can cause electric
shock, short circuiting or fire)
Never remove the plug from the
socket by pulling the mains lead.
Never touch the plug with wet
hands.
(risk of electrocution and/or fire)
Do not extend the power cord.
(risk of breakdown or fire)
! Ensure you hold the power
plug properly when either
plugging in or unplugging.
Do not kink or place the main
power lead under heavy objects.
(risk of electric shock or fire)
Do not overload the dedicated
power socket with other
equipment.
Always turn off the unit by use
of its control cnob and
never by just pulling the
mains plug or tripping the
circuit breaker.
!
Ensure that the unit is properly earthed
through the mains power circuit.
Do not install, use
or place any
combustible
liquids or gases
nearthe product.
(risk of fire or
explosion)
Never place the unit near
combustible products such as
curtains, carpets etc. This can
cause a fire.
Never put hands or
objects into the main
body of the product.
Never touch it
immediately after use.
(risk of fire burns or
electric shock)
Never place combustible objects on
the product such as vinyl and
plastic items.(can
cause a risk of fire)
The heater must not be located
immediately below a socket outlet
when in use. (risk of fire)