Veit 8905, Original Instruction Manual

Page: 42 / 70

Kragen- und Manschettenpresse 8905
8905 Collar and Cuff Press
23.05.2017
42
No. Description Reason Trouble Shooting
1 No function at all Main switch switched off Switch on main switch
No supply voltage Reconnect power supply and check
No compressed air Reconnect compressed-air supply
Switch at safety frame S1, S1.1, S1.2,
S1.3 defective Check and replace if necessary
Safety relay K1 defective Check and replace if necessary
Reset button S2 defective Check and replace if necessary
Power pack T1 defective Check and replace if necessary
Fuse F3 has triggered Search and clearing faults,
fuse switch on
Main switch Q0 defective Check and replace if necessary
2 Head buck does not open /close 5/2 directional control valve Y3
defective Check and replace if necessary
Pedal „Start“ S11 defective
Check and replace if necessary
Process control CD12 defective Check and replace if necessary
3 Head buck does not open /close
properly Insufficient compressed-air supply Check compressed-air supply
provided by customer
End-of-travel damping set incorrectly Readjust end positions at cylinder Z1
or replace sealing
One-way restrictor V2, V3 set
incorrectly Check and reset or replace if
necessary
Cylinder Z1 leak Check tightness and
replace if necessary
4 No function at heating Process control SD12 defective Check and replace if necessary
Temperature sensor R9 defective Check and replace if necessary
Resistor R8 defective Check and replace if necessary
4.1 Head buck-Cuff heating plate does not
heat Fuse F3 has triggered Search and clearing faults,
fuse switch on
Contactor K3 defective Check and replace if necessary
Hot element R4, R6 defective Check and replace if necessary
Thermostat B1, B2 defective Check and replace if necessary
Head buck-Collar heating plate does
not heat Fuse F2 has triggered Search and clearing faults,
fuse switch on
Contactor K3 defective Check and replace if necessary
Hot element R5 defective Check and replace if necessary
4.2 Lower buck-Cuff heating plate does
not heat Fuse F1, F4 has triggered Search and clearing faults,
fuse switch on
Hot element R1, R3 defective Check and replace if necessary
Lower buck-Collar heating plate does
not heat Fuse F2, F5 has triggered Search and clearing faults,
fuse switch on
Hot element R2 defective Check and replace if necessary