12
5.2
Storage and Transport
When reserving and transporting, don’t place the device in somewhere
the temperature and humidity is too high or too low, or the dust is heavy.
Please meet the requirements of reserve and transportation. The
requirement is as below: humidity: 0-90% (non-condensing),
temperature: 0°C to 60°C.
Please take the device away from the flammable and explosive gas
source and take care to avoid impact or vibration when transporting.
The proper disposal for packaging should meet the specification of local
regulations
or the country’s environmental protection regulations.
After long-distance transportation, please inspect the projection by the
calibration card before using it.
6. Warranty and Maintenance
6.1
Warranty
The
bs300
should work in the temperature between 10°C to 30°C.
Malfunction would occur out of this range.
When the
bs300
is not operating properly, please turn off the device.
If any unknown fault appears, please stop using the
bs300
immediately. Then turn off the device and contact our company
support.
Our company warrants the
bs300 .
In period of one year after the
purchasing date, the device is of sound materials, workmanship and
conforms to the manufacturer’s specifications.
The warranty period for accessories is:
The imaging unit – 18 months,
Battery
– 6 months.
Our company will repair or replace any product free that does not
satisfy these warranties within limitation of time. You must obtain a
Return of Material Authorization (RMA) number from our company
support. The repaired unit has a 90-day warranty from the date when
it is received by the customer.
