9
Press the Power button to withdraw from this projected image.
4.5
Charge
The unremovable battery is inside the imaging unit.
Please fully charged the battery before using it at the first time.
Please avoid fully discharge, it is better to charge the battery before
using up.
When battery is in the protected mode because of short circuit or over
discharge, please charge the battery to recover it.
Inspect the faction of charging and discharging every two months, if
there is any problem, please contact the distributor or manufacturer.
The proper disposal for used batteries should meet the specification of
local regulations.
Please use the original adaptor to charge the battery.
Note
:
When the power is less than 3%, the instrument "beep" continually.
Short press any button (about 0.5 seconds) can eliminate the sound.
If reboot the device, the “beep” sound will remind again before the
battery charged.
The power indicator is on the upper right corner of projection image. The
device needs to be charged when there is only a little power. The following
is the charging step.
(1)
Connect the charging cradle and AC power with the adapter.
(2)
Put the imaging unit into the charging cradle.
(3)
When the indicator light is red, the device is being charged.
Note
: Pay attention to ensure the correct direction and incorrect operation
will damage the machine.
