OSD Menu Setting
PTZ CAMERA
t
Password should be inputted 2 times using number, CALL key.
t
In case of same thing with PASSWORD input of 2 times, "CONFIRMED"
will be showed up and back to the Menu after 4 second.
t
Basic value of PASSWORD : 99
C-3. OSD DISPLAY
Each part can be set up into ON/OFF, on On, remark operating sign in the
designed place.
OSD DISPLAY
CAMERA ID ON
CALL ID ON
SECTOR ID ON
TOUR ID ON
PATT ID ON
SCAN ID ON
COORDINATE ON
[PREVIOUS PAGE]
C-4. SYSTEM STATUS
This is for checking the information of IR SPEED DOME, instruction is below.
SYSTEM STATUS
PROTOCOL
PELCO-D, P
BAUD RATE 2400
BPS
FIRMWARE VER 1.00a
UPGRADED DATE 09.02.11
CAMERA MODULE SCM3270
R/B UPGRADED DATE 01.K.10
[PREVIOUS PAGE]
t
PROTOCOL : Communication Protocol information between Controller and
SPEED DOME.
t
RAUD RATE : Communication Speed information between Controller and
SPEED DOME.
t
FIRMWARE VER : Version information of Firmware used in product.
t
UPG
RADED DATE : Information on final writing day of the firmware.
t
CAMERA MODULE : Module information used in product.
t
R/B UPGRADED DATE : Information of final writing day on firmware of the
REAR BOARD.
016
