Quick Operating Keys
PTZ CAMERA
The dome supports Pelco-D/P, SAMSUNG and VICON i3DVR(SAE) protocols.
The dome may be used with any controller or DVR etc that supports the Pelco D
and Pelco P protocols.
The default setting of the dome is Pelco D / P (auto detection) with 2400 bps
(baud rate).
[PELCO D/P PROTOCOLS]
The comprehensive feature set of the dome is available from Pelco compatible
controllers via quick operation keys as defined below.
1~64 + CALL and 100~255 + CALL are used for normal user
CALLs. CALLs 65-99 + are reserved for special functions.
For example, to enter OSD MENU, press the button 95 + CALL
<Quick Operation Key Table 1>
Number
Note
Function
1~64,100~255 +CALL
CALL
Executing CALL 1 ~ 64, 100~255
65 +CALL
CALL Status
Display CALL Status
66 +CALL
Auto Scan
Executing Auto Scan
67 +CALL
Auto Flip
Selectable On/Off in Auto Flip mode
70 + CALL
VIB CORR
Selectable On/Off in Picture Stabilization function
71~78 + CALL
Group Tour
Executing Group Tour #1 ~ #8
81~88 + CALL
Pattern
Executing Pattern #1 ~ #8
91 + CALL
Zero Position
Searching Pan / Tilt Zero Position
92 + CALL
Freeze
Select Freeze image when camera is working
93 + CALL
BLC
Selectable On/Off in BLC function
94 + CALL
Day / Night
Selectable Day / Night / Auto Mode
95 + CALL
OSD
Entering OSD Main Menu
96 + CALL
Focus Adjust
Focus adjust
97 +CALL
Alarm
Selectable Enable/Disable all Alarms
98 +CALL
AUX 1
Selectable On/Off in Aux1
99 +CALL
AUX 2
Selectable On/Off in Aux2
<Quick Operation Keys Table 2: Use these function keys if controller has these keys>
Menu
Function
Tilt Up / Down
Sub menu cursor moves up / down
Pan Left / Right
Enter to the sub menu or status change or decrement
Focus Near
Using for Enter key when user select YES or NO
Focus Far
Using for function changing keys when set coordinate
Zoom Tele
Status cursor to the right
Zoom Wide
Status cursor to the left
009
