5-3
Assembly
To find out how the pins and signals
are assigned, use a multimeter to
test the cables on the original ac-
celerator module. The following
signals are usually present: 2x
supply voltage, 2x signal ,
2x earth.
You can enter the signals you
have measured in the table printed
below.
Connect the cables correctly ac-
cording to the pin assignment.
Accelerator pedal signal/pin assignment
Fig. 5-2: VAS pin/signal assignment
Cable
colour
Wiring harness sig-
nals
Measured
signals
Measured cable
colour
Orange
5 V
Purple
5 V
Grey
Earth
Blue
Earth
White
Pot. output
Pink
Pot. output
