20
21
Diameter Circle Measurement
Click,
hold and extend out to the chosen
diameter. The diameter, circumference
and area of the circle will be calculated.
Three Points Angle Measurement
Select
any three points, the angle values will
calculated and displayed.
Changing Calibration
Use the following steps to change calibration settings.
1. Double-click to open the image, click the
‘Calibration’ icon, and select ‘Reset Magnification’
and then ‘Reset Picture Magnification’. Then start
calibration again.
2. Change the magnification rate and capture several
images, click on the image to enter measurement
interface. Select ‘Set Magnification’ then ‘Set
Picture Magnification’, a dialogue box will appear;
enter your chosen magnification rate and click ‘OK’.
3. If you want to use the same magnification rate to
capture pictures, click ‘Set Magnification’ then ‘Set
Capture Magnification’ to save settings. All pictures
will use the same magnification rate.
Summary of Contents for DISCOVERY DX-3
Page 1: ...VMS 008 DX3 User Manual...
