![background image](http://html2.mh-extra.com/html/vega/vegapuls-wl-61/vegapuls-wl-61_installation-and-maintenance-instructions-manual_3853118026.webp)
26
6 Set up with VEGADIS 62
VEGAPULS WL 61 • 4 … 20 mA/HART - two-wire
38061-EN-121011
5. Edit value via "
OK
" and adjust the requested value, for example,
5 m.
6. Save value with "
OK
", VEGAPULS WL 61 displays briefly "
Wait
",
then the value is taken over into the sensor.
7. Move to the menu item "
MB end
", there the min. measuring dis-
tance is displayed, for example the default setting 0 m.
8. Proceed accordingly for "
MB end
", enter for example the value
1 m and store.
The min./max. adjustment is finished.
After "
[ESC]
", the display shows the actually measured distance as
digital value in m and the level on the bargraph.
Keep in mind that the displayed values are anticyclical. With increas-
ing distance, the 4 … 20 mA value gets smaller and vice versa.
6.3 Scale the indication
Proceed as follows for indication of the level as digital value in %:
1. Press "
OK
" to reach the adjustment menu.
2. Select the submenu "
Measurement
" and confirm with "
OK
".
3. Select the menu item "
Unit
"
4. Select the unit "
USER
" and confirm with "
OK
".